Diferencia entre revisiones de «WRFextras»

De Wikicima
(Quitando lo de la copmilación con gcc)
 
(No se muestran 2 ediciones intermedias del mismo usuario)
Línea 30: Línea 30:


'''NOTE:''' Since WRFv3.9 there is a new unique file for the aerosol climatologies <code>QNWFA_QNIFA_SIGMA_MONTHLY</code>
'''NOTE:''' Since WRFv3.9 there is a new unique file for the aerosol climatologies <code>QNWFA_QNIFA_SIGMA_MONTHLY</code>
= gcc cpmpilation =
<hydra> has by default intel C/Fortran compilers. However, <hydra> also has the free gcc compilers.
Here are the instructions followed to compile WRF using the gcc and gfortran compilers. In order to do that, one needs to compile all the required libraries (openmpi, zlib, curl, hdf5 and netcdf) using these compilers. No <code>udunits</code> was installed due to issues with <code>cmake</code>
Here the steps starting from a folder where we will download all the sources called
<pre>
/share/tools/Downloads/
</pre>
These compilation steps are kept inside the file <code>/share/tools/Downloads/compilation.inf</code>
1.- Compiling <code>openmpi v3.0.0.</code>
* getting source
<pre>
$ wget https://www.open-mpi.org/software/ompi/v3.0/downloads/openmpi-3.0.0.tar.gz
</pre>
* Decompressing
<pre>
$ tar xvfz openmpi-3.0.0.tar.gz
</pre>
* Going there
<pre>
$ cd openmpi-3.0.0
</pre>
* Creation of the folder where the libraries will be installed
<pre>
$ mkdir -p /share/tools/bin/openmpi/3.0.0/gcc
</pre>
* Configuring the compilation/installation
<pre>
$ ./configure --prefix=/share/tools/bin/openmpi/3.0.0/gcc >& run_configure.log
</pre>
* Looking for errors in <code>run_configure.log</code>. If not </code>make</code> chain (ensuring each steps goes fine)
<pre>
$ make all >& run_make.log
$ make test >& run_make_test.log
$ make install >& run_make_install.log
</pre>
For all the others libraries is similar, but paying attention to provide the right installation folder and the right location of the new compiled libraries
1.- zlib-1.2.11
<code>
  src: https://zlib.net/zlib-1.2.11.tar.gz
  $ ./configure --prefix=/share/tools/bin/zlib/1.2.8/gcc >& run_configure.log
  $ make >& make.log
  $ make check >& make_check.log
  $ make install >& make_install.log
</code>
1.- hdf5-1.10.1
<code>
  src: hdf5-1.10.1.tar.bz2
  $ export CPP=/usr/bin/cpp
  $ apt-get install g++
  $ ./configure --enable-fortran --with-zlib=/share/tools/bin/zlib/1.2.8/gcc/lib --prefix=/share/tools/bin/hdf5/1.10.1/gcc  >& run_configure.log
  $ make >& make.log
  $ make check >& make_check.log
  $ make install >& make_install.log
</code>
1.- libcurl-7.57.0
<code>
  src: https://curl.haxx.se/download/curl-7.57.0.tar.gz
  $ ./configure --prefix=/share/tools/bin/curl/7.57.0/gcc >& run_configure.log
  $ make >& make.log
  $ make check >& make_check.log
  $ make install >& make_install.log
</code>
2.- netcdf-4.5.0
<code>
  src: ftp://ftp.unidata.ucar.edu/pub/netcdf/netcdf-4.5.0.tar.gz
  $ apt-get install curl
  $ export LDFLAGS='-L/share/tools/bin/zlib/1.2.8/gcc/lib -L/share/tools/bin/hdf5/1.10.1/gcc/lib -L/share/tools/bin/curl/7.57.0/gcc/lib'
  $ export CPPFLAGS='-I/share/tools/bin/zlib/1.2.8/gcc/include -I/share/tools/bin/hdf5/1.10.1/gcc/include -I/share/tools/bin/curl/7.57.0/gcc/include'
  $ ./configure --enable-netcdf-4 --prefix=/share/tools/bin/netcdf/4.5.0/gcc >& run_configure.log
  $ make >& make.log
  $ make check >& make_check.log
  $ make install >& make_install.log
</code>
Fortran interdace
<code>
  src: ftp://ftp.unidata.ucar.edu/pub/netcdf/netcdf-fortran-4.4.4.tar.gz
  $ export LD_LIBRARY_PATH=-I/share/tools/bin/netcdf/4.5.0/gcc/lib:${LD_LIBRARY_PATH}
  $ export LDFLAGS='-L/share/tools/bin/zlib/1.2.8/gcc/lib -L/share/tools/bin/hdf5/1.10.1/gcc/lib -L/share/tools/bin/curl/7.57.0/gcc/lib -L/share/tools/bin/netcdf/4.5.0/gcc/lib'
  $ export CPPFLAGS='-I/share/tools/bin/zlib/1.2.8/gcc/include -I/share/tools/bin/hdf5/1.10.1/gcc/include -I/share/tools/bin/curl/7.57.0/gcc/include -I/share/tools/bin/netcdf/4.5.0/gcc/include'
  $ ./configure --prefix=/share/tools/bin/netcdf/4.5.0/gcc >& run_configure.log
  $ make >& make.log
  $ make check >& make_check.log
  $ make install >& make_install.log
</code>


= namelists =
= namelists =

Revisión actual - 16:13 6 dic 2017

Aerosol climatologies for Thompson aerosol aware

Since WRF v3.6 there is an option to have a micro-physics scheme with awareness on aersol densities. See more details in Thompson Aerosol-aware.

One need to add at WPS - metgrid, the files with the climatologies of aerosos. These climatologies come from GCM runs where aerosols where active. There are 3 different climatologies (QNWFA_QNIFA_Monthly_AWIP/GFS/ERA), comming from the ue of 3 different re-analysis.

In case of using ERA-Interim re-analyses, on should include on the namelist.wps 

&metgrid
 fg_name = 'FILE',
 io_form_metgrid = 2,
 opt_metgrid_tbl_path = './'
 constants_name = 'QNWFA_QNIFA_Monthly_ERA'
/

And then link the climatological fle (in this case the ERA-Interim) where metgrid.exe will be run 

$ ln -s /share/GEOG/QNWFA_QNIFA_Monthly_ERA ./

At the namelist.input one should have 

mp_physics              = 28
use_aero_icbc           = .T.
aer_opt                 = 3
  • use_aero_icbc is used to specify that we want to use the QNWFA_QNIFA_Monthly_* aerosol climatologies
  • aer_opt is used to specify that we want the same aerosol climatologies for microphysics and radiation scheme (oonly for RRTMG)

NOTE: Since WRFv3.9 there is a new unique file for the aerosol climatologies QNWFA_QNIFA_SIGMA_MONTHLY

namelists

Here are provided some nameslits ready to be used

SA50k

Full South American domain at 50 km Archivo:namelist.wps.SA50k.odt, Archivo:namelist.input.SA50k.odt (NOTE: Transform to text files!)

Full South America at 50 km resolution

RELAMPAGO 1dom 4km

RELAMPAGO case-studies single domain at 4 km Archivo:namelist.wps.RELAMPAGO1dom.odt, Archivo:namelist.input.RELAMPAGO1dom.odt (NOTE: Transform to text files!)

RELAMPAGO single domain 4 km resolution

RELAMPAGO 2dom 12, 4km

RELAMPAGO case-studies nested domain at 12 and 4 km Archivo:namelist.wps.RELAMPAGO2dom.odt, Archivo:namelist.input.RELAMPAGO2dom.odt (NOTE: Transform to text files!)

RELAMPAGO 2 domains 12, 4 km resolution
Obtenido de «http://wiki.cima.fcen.uba.ar/index.php?title=WRFextras&oldid=375»