intel compilation

CIMA's hydra intel configuration is done via the following instruction:

$ source /opt/load-libs.sh 1

The following libraries, compiled with Intel 2021.4.0 compilers, were loaded:
* MPICH 3.4.2
* NetCDF 4
* HDF5 1.10.5
* JASPER 2.0.33

Which creates the following environment:

declare -x ACL_BOARD_VENDOR_PATH="/opt/Intel/OpenCLFPGA/oneAPI/Boards"
declare -x ADVISOR_2021_DIR="/opt/intel/oneapi/advisor/2021.4.0"
declare -x APM="/opt/intel/oneapi/advisor/2021.4.0/perfmodels"
declare -x CCL_CONFIGURATION="cpu_gpu_dpcpp"
declare -x CCL_ROOT="/opt/intel/oneapi/ccl/2021.4.0"
declare -x CLASSPATH="/opt/intel/oneapi/mpi/2021.4.0//lib/mpi.jar:/opt/intel/oneapi/dal/2021.4.0/lib/onedal.jar"
declare -x CLCK_ROOT="/opt/intel/oneapi/clck/2021.4.0"
declare -x CMAKE_PREFIX_PATH="/opt/intel/oneapi/vpl/2021.6.0:/opt/intel/oneapi/tbb/2021.4.0/env/..:/opt/intel/oneapi/dal/2021.4.0"
declare -x CMPLR_ROOT="/opt/intel/oneapi/compiler/2021.4.0"
declare -x CPATH="/opt/intel/oneapi/vpl/2021.6.0/include:/opt/intel/oneapi/tbb/2021.4.0/env/../include:/opt/intel/oneapi/mpi/2021.4.0//include:/opt/intel/oneapi/mkl/2021.4.0/include:/opt/intel/oneapi/ipp/2021.4.0/include:/opt/intel/oneapi/ippcp/2021.4.0/include:/opt/intel/oneapi/ipp/2021.4.0/include:/opt/intel/oneapi/dpl/2021.5.0/linux/include:/opt/intel/oneapi/dpcpp-ct/2021.4.0/include:/opt/intel/oneapi/dnnl/2021.4.0/cpu_dpcpp_gpu_dpcpp/lib:/opt/intel/oneapi/dev-utilities/2021.4.0/include:/opt/intel/oneapi/dal/2021.4.0/include:/opt/intel/oneapi/compiler/2021.4.0/linux/include:/opt/intel/oneapi/ccl/2021.4.0/include/cpu_gpu_dpcpp"
declare -x CPLUS_INCLUDE_PATH="/opt/intel/oneapi/clck/2021.4.0/include"
declare -x DAALROOT="/opt/intel/oneapi/dal/2021.4.0"
declare -x DALROOT="/opt/intel/oneapi/dal/2021.4.0"
declare -x DAL_MAJOR_BINARY="1"
declare -x DAL_MINOR_BINARY="1"
declare -x DBUS_SESSION_BUS_ADDRESS="unix:path=/run/user/1624/bus"
declare -x DNNLROOT="/opt/intel/oneapi/dnnl/2021.4.0/cpu_dpcpp_gpu_dpcpp"
declare -x DPCT_BUNDLE_ROOT="/opt/intel/oneapi/dpcpp-ct/2021.4.0"
declare -x DPL_ROOT="/opt/intel/oneapi/dpl/2021.5.0"
declare -x FI_PROVIDER_PATH="/opt/intel/oneapi/mpi/2021.4.0//libfabric/lib/prov:/usr/lib64/libfabric"
declare -x FPGA_VARS_ARGS="1"
declare -x FPGA_VARS_DIR="/opt/intel/oneapi/compiler/2021.4.0/linux/lib/oclfpga"
declare -x GDB_INFO="/opt/intel/oneapi/debugger/10.2.4/documentation/info/"
declare -x HOME="/home/lluis.fita"
declare -x INFOPATH="/opt/intel/oneapi/debugger/10.2.4/gdb/intel64/lib"
declare -x INSPECTOR_2021_DIR="/opt/intel/oneapi/inspector/2021.4.0"
declare -x INTELFPGAOCLSDKROOT="/opt/intel/oneapi/compiler/2021.4.0/linux/lib/oclfpga"
declare -x INTEL_LICENSE_FILE="/opt/intel/licenses:/home/lluis.fita/intel/licenses:/opt/intel/oneapi/clck/2021.4.0/licensing:/opt/intel/licenses:/home/lluis.fita/intel/licenses:/Users/Shared/Library/Application Support/Intel/Licenses"
declare -x INTEL_PYTHONHOME="/opt/intel/oneapi/debugger/10.2.4/dep"
declare -x IPPCP_TARGET_ARCH="intel64"
declare -x IPPCRYPTOROOT="/opt/intel/oneapi/ippcp/2021.4.0"
declare -x IPPROOT="/opt/intel/oneapi/ipp/2021.4.0"
declare -x IPP_TARGET_ARCH="intel64"
declare -x I_MPI_ROOT="/opt/intel/oneapi/mpi/2021.4.0"
declare -x LANG="en_US.UTF-8"
declare -x LANGUAGE="en_US:en"
declare -x LD_LIBRARY_PATH="/opt/netcdf/netcdf-4/intel/2021.4.0/lib:/opt/hdf5/hdf5-1.10.5/intel/2021.4.0/lib:/opt/zlib/zlib-1.2.11/intel/2021.4.0/lib:/opt/jasper/jasper-version-2.0.33/intel/2021.4.0/lib:/opt/intel/oneapi/vpl/2021.6.0/lib:/opt/intel/oneapi/tbb/2021.4.0/env/../lib/intel64/gcc4.8:/opt/intel/oneapi/mpi/2021.4.0//libfabric/lib:/opt/intel/oneapi/mpi/2021.4.0//lib/release:/opt/intel/oneapi/mpi/2021.4.0//lib:/opt/intel/oneapi/mkl/2021.4.0/lib/intel64:/opt/intel/oneapi/itac/2021.4.0/slib:/opt/intel/oneapi/ipp/2021.4.0/lib/intel64:/opt/intel/oneapi/ippcp/2021.4.0/lib/intel64:/opt/intel/oneapi/ipp/2021.4.0/lib/intel64:/opt/intel/oneapi/dnnl/2021.4.0/cpu_dpcpp_gpu_dpcpp/lib:/opt/intel/oneapi/debugger/10.2.4/gdb/intel64/lib:/opt/intel/oneapi/debugger/10.2.4/libipt/intel64/lib:/opt/intel/oneapi/debugger/10.2.4/dep/lib:/opt/intel/oneapi/dal/2021.4.0/lib/intel64:/opt/intel/oneapi/compiler/2021.4.0/linux/lib:/opt/intel/oneapi/compiler/2021.4.0/linux/lib/x64:/opt/intel/oneapi/compiler/2021.4.0/linux/lib/emu:/opt/intel/oneapi/compiler/2021.4.0/linux/lib/oclfpga/host/linux64/lib:/opt/intel/oneapi/compiler/2021.4.0/linux/lib/oclfpga/linux64/lib:/opt/intel/oneapi/compiler/2021.4.0/linux/compiler/lib/intel64_lin:/opt/intel/oneapi/ccl/2021.4.0/lib/cpu_gpu_dpcpp"
declare -x LIBRARY_PATH="/opt/intel/oneapi/vpl/2021.6.0/lib:/opt/intel/oneapi/tbb/2021.4.0/env/../lib/intel64/gcc4.8:/opt/intel/oneapi/mpi/2021.4.0//libfabric/lib:/opt/intel/oneapi/mpi/2021.4.0//lib/release:/opt/intel/oneapi/mpi/2021.4.0//lib:/opt/intel/oneapi/mkl/2021.4.0/lib/intel64:/opt/intel/oneapi/ipp/2021.4.0/lib/intel64:/opt/intel/oneapi/ippcp/2021.4.0/lib/intel64:/opt/intel/oneapi/ipp/2021.4.0/lib/intel64:/opt/intel/oneapi/dnnl/2021.4.0/cpu_dpcpp_gpu_dpcpp/lib:/opt/intel/oneapi/dal/2021.4.0/lib/intel64:/opt/intel/oneapi/compiler/2021.4.0/linux/compiler/lib/intel64_lin:/opt/intel/oneapi/compiler/2021.4.0/linux/lib:/opt/intel/oneapi/clck/2021.4.0/lib/intel64:/opt/intel/oneapi/ccl/2021.4.0/lib/cpu_gpu_dpcpp"
declare -x LOGNAME="lluis.fita"
declare -x LS_COLORS="rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.webp=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:"
declare -x MANPATH="/opt/intel/oneapi/mpi/2021.4.0/man:/opt/intel/oneapi/itac/2021.4.0/man:/opt/intel/oneapi/debugger/10.2.4/documentation/man:/opt/intel/oneapi/compiler/2021.4.0/documentation/en/man/common:/opt/intel/oneapi/clck/2021.4.0/man::"
declare -x MKLROOT="/opt/intel/oneapi/mkl/2021.4.0"
declare -x MOTD_SHOWN="pam"
declare -x NLSPATH="/opt/intel/oneapi/mkl/2021.4.0/lib/intel64/locale/%l_%t/%N"
declare -x OCL_ICD_FILENAMES="libintelocl_emu.so:libalteracl.so:/opt/intel/oneapi/compiler/2021.4.0/linux/lib/x64/libintelocl.so"
declare -x OLDPWD
declare -x ONEAPI_ROOT="/opt/intel/oneapi"
declare -x PATH="/opt/jasper/jasper-version-2.0.33/intel/2021.4.0/bin:/opt/hdf5/hdf5-1.10.5/intel/2021.4.0/bin:/opt/netcdf/netcdf-4/intel/2021.4.0/bin:/opt/mpich/mpich-3.4.2/intel/2021.4.0/bin:/opt/intel/oneapi/vtune/2021.7.1/bin64:/opt/intel/oneapi/vpl/2021.6.0/bin:/opt/intel/oneapi/mpi/2021.4.0//libfabric/bin:/opt/intel/oneapi/mpi/2021.4.0//bin:/opt/intel/oneapi/mkl/2021.4.0/bin/intel64:/opt/intel/oneapi/itac/2021.4.0/bin:/opt/intel/oneapi/inspector/2021.4.0/bin64:/opt/intel/oneapi/dpcpp-ct/2021.4.0/bin:/opt/intel/oneapi/dev-utilities/2021.4.0/bin:/opt/intel/oneapi/debugger/10.2.4/gdb/intel64/bin:/opt/intel/oneapi/compiler/2021.4.0/linux/lib/oclfpga/llvm/aocl-bin:/opt/intel/oneapi/compiler/2021.4.0/linux/lib/oclfpga/bin:/opt/intel/oneapi/compiler/2021.4.0/linux/bin/intel64:/opt/intel/oneapi/compiler/2021.4.0/linux/bin:/opt/intel/oneapi/clck/2021.4.0/bin/intel64:/opt/intel/oneapi/advisor/2021.4.0/bin64:/usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/snap/bin"
declare -x PKG_CONFIG_PATH="/opt/intel/oneapi/vtune/2021.7.1/include/pkgconfig/lib64:/opt/intel/oneapi/vpl/2021.6.0/lib/pkgconfig:/opt/intel/oneapi/tbb/2021.4.0/env/../lib/pkgconfig:/opt/intel/oneapi/mpi/2021.4.0/lib/pkgconfig:/opt/intel/oneapi/mkl/2021.4.0/lib/pkgconfig:/opt/intel/oneapi/ippcp/2021.4.0/lib/pkgconfig:/opt/intel/oneapi/inspector/2021.4.0/include/pkgconfig/lib64:/opt/intel/oneapi/dpl/2021.5.0/lib/pkgconfig:/opt/intel/oneapi/dal/2021.4.0/lib/pkgconfig:/opt/intel/oneapi/compiler/2021.4.0/lib/pkgconfig:/opt/intel/oneapi/ccl/2021.4.0/lib/pkgconfig:/opt/intel/oneapi/advisor/2021.4.0/include/pkgconfig/lib64:"
declare -x PWD="/home/lluis.fita"
declare -x PYTHONPATH="/opt/intel/oneapi/advisor/2021.4.0/pythonapi"
declare -x SETVARS_COMPLETED="1"
declare -x SETVARS_VARS_PATH="/opt/intel/oneapi/vtune/latest/env/vars.sh"
declare -x SHELL="/bin/bash"
declare -x SHLVL="1"
declare -x SSH_CLIENT="157.92.36.32 41330 22"
declare -x SSH_CONNECTION="157.92.36.32 41330 157.92.28.248 22"
declare -x SSH_TTY="/dev/pts/0"
declare -x TBBROOT="/opt/intel/oneapi/tbb/2021.4.0/env/.."
declare -x TERM="xterm-256color"
declare -x USER="lluis.fita"
declare -x VTUNE_PROFILER_2021_DIR="/opt/intel/oneapi/vtune/2021.7.1"
declare -x VT_ADD_LIBS="-ldwarf -lelf -lvtunwind -lm -lpthread"
declare -x VT_LIB_DIR="/opt/intel/oneapi/itac/2021.4.0/lib"
declare -x VT_MPI="impi4"
declare -x VT_ROOT="/opt/intel/oneapi/itac/2021.4.0"
declare -x VT_SLIB_DIR="/opt/intel/oneapi/itac/2021.4.0/slib"
declare -x XDG_DATA_DIRS="/usr/local/share:/usr/share:/var/lib/snapd/desktop"
declare -x XDG_RUNTIME_DIR="/run/user/1624"
declare -x XDG_SESSION_CLASS="user"
declare -x XDG_SESSION_ID="1848"
declare -x XDG_SESSION_TYPE="tty"
declare -x http_proxy="http://proxy1.cima.fcen.uba.ar:3128/"

Downloading CESM2

Following CESM2 Quick Start Guide and CESM2 github instructions and this tutorial

Cloning the code for version 2.2.2:

$ mkdir -p CESM/v2.2.2/intel
$ git clone -b release-cesm2.2.2 git@github.com:ESCOMP/CESM.git my_cesm_sandbox

This will create a directory my_cesm_sandbox/ in your current working directory.

We got the following

$ cd my_cesm_sandbox/
$ ls
ChangeLog           CODE_OF_CONDUCT.md  Externals.cfg       manage_externals
ChangeLog_template  describe_version    Externals_cime.cfg  README.rst
cime_config         doc                 LICENSE.txt

Verifying that installation was fine:

$ ./manage_externals/checkout_externals
$ ls 
ChangeLog           CODE_OF_CONDUCT.md  Externals.cfg       README.rst
ChangeLog_template  components          Externals_cime.cfg
cime                describe_version    LICENSE.txt
cime_config         doc                 manage_externals

Defining the compilation / installation

Machine

We need to create the configuration for hydra. For that purpose we are going to use the exampled configuration for "centos7-linux" from file

cime/config/cesm/machines/config_machines.xml

. This is its content:

  <machine MACH="hydra">
    <DESC>
      Example port to CIMA's hydra
    </DESC>
    <NODENAME_REGEX>node</NODENAME_REGEX>
    <OS>LINUX Debian</OS>
    <PROXY> https://howto.get.out </PROXY>
    <COMPILERS>gnu</COMPILERS>
    <MPILIBS>mpich</MPILIBS>
    <PROJECT>none</PROJECT>
    <SAVE_TIMING_DIR> </SAVE_TIMING_DIR>
    <CIME_OUTPUT_ROOT>$ENV{HOME}/cesm/scratch</CIME_OUTPUT_ROOT>
    <DIN_LOC_ROOT>/share/cesm/inputdata</DIN_LOC_ROOT>
    <DIN_LOC_ROOT_CLMFORC>/share/cesm/inputdata/lmwg</DIN_LOC_ROOT_CLMFORC>
    <DOUT_S_ROOT>/share/cesm/expriments/$CASE</DOUT_S_ROOT>
    <BASELINE_ROOT>$ENV{HOME}/cesm/cesm_baselines</BASELINE_ROOT>
    <CCSM_CPRNC>$ENV{HOME}/cesm/tools/cime/tools/cprnc/cprnc</CCSM_CPRNC>
    <GMAKE>make</GMAKE>
    <GMAKE_J>8</GMAKE_J>
    <BATCH_SYSTEM>pbs</BATCH_SYSTEM>
    <SUPPORTED_BY>soporte@cima.fcen.uba.ar</SUPPORTED_BY>
    <MAX_TASKS_PER_NODE>128</MAX_TASKS_PER_NODE>
    <MAX_MPITASKS_PER_NODE>128</MAX_MPITASKS_PER_NODE>
    <PROJECT_REQUIRED>FALSE</PROJECT_REQUIRED>
    <mpirun mpilib="impi">
      <executable>mpiexec</executable>
      <arguments>
        <arg name="ntasks"> -np {{ total_tasks }} </arg>
      </arguments>
    </mpirun>
    <environment_variables>
      <env name="OMP_STACKSIZE">256M</env>
    </environment_variables>
    <resource_limits>
      <resource name="RLIMIT_STACK">-1</resource>
    </resource_limits>
  </machine>

Creation of the hydra's CESM main folders

$ mkdir /share/cesm/expriments/
$ mkdir /share/cesm/inputdata

Compilers

Configuration of the compilers is done via the file cime/config/cesm/machines/config_cmopilers.xml.

Some modifications are introduced in order to make sure that compilation is done throughtout hydra's intel configration

$ cp cime/config/cesm/machines/config_compilers.xml cime/config/cesm/machines/config_compilers_orig.xml
$ diff cime/config/cesm/machines/config_compilers.xml cime/config/cesm/machines/config_compilers_orig.xml
1636,1690d1635
< <compiler MACH="hydra" COMPILER="intel">
<   <CFLAGS>
<     <base>  -qno-opt-dynamic-align -fp-model precise -std=gnu99 </base>
<     <append compile_threaded="TRUE"> -qopenmp </append>
<     <append DEBUG="FALSE"> -O2 -debug minimal </append>
<     <append DEBUG="TRUE"> -O0 -g </append>
<   </CFLAGS>
<   <CPPDEFS>
<     <!-- http://software.intel.com/en-us/articles/intel-composer-xe/ -->
<     <append> -DFORTRANUNDERSCORE -DCPRINTEL</append>
<   </CPPDEFS>
<   <CXX_LINKER>FORTRAN</CXX_LINKER>
<   <FC_AUTO_R8>
<     <base> -r8 </base>
<   </FC_AUTO_R8>
<   <FFLAGS>
<     <base> -qno-opt-dynamic-align  -convert big_endian -assume byterecl -ftz -traceback -assume realloc_lhs -fp-model source  </base>
<     <append compile_threaded="TRUE"> -qopenmp </append>
<     <append DEBUG="TRUE"> -O0 -g -check uninit -check bounds -check pointers -fpe0 -check noarg_temp_created </append>
<     <append DEBUG="FALSE"> -O2 -debug minimal </append>
<   </FFLAGS>
<   <FFLAGS_NOOPT>
<     <base> -O0 </base>
<   </FFLAGS_NOOPT>
<   <NETCDF_C_PATH>/opt/netcdf/netcdf-4/intel/2021.4.0</NETCDF_C_PATH>
<   <NETCDF_FORTRAN_PATH>/opt/netcdf/netcdf-4/intel/2021.4.0/lib</NETCDF_FORTRAN_PATH>
<   <FIXEDFLAGS>
<     <base> -fixed  </base>
<   </FIXEDFLAGS>
<   <FREEFLAGS>
<     <base> -free </base>
<   </FREEFLAGS>
<   <LDFLAGS>
<     <append compile_threaded="TRUE"> -qopenmp </append>
<   </LDFLAGS>
<   <MPICC> /opt/mpich/mpich-3.4.2/intel/2021.4.0/bin/mpicc  </MPICC>
<   <MPICXX> /opt/mpich/mpich-3.4.2/intel/2021.4.0/bin/mpicxx </MPICXX>
<   <MPIFC> /opt/mpich/mpich-3.4.2/intel/2021.4.0/bin/mpif90 </MPIFC>
<   <SCC> /opt/intel/oneapi/compiler/2021.4.0/linux/bin/intel64/icc </SCC>
<   <SCXX> /opt/intel/oneapi/compiler/2021.4.0/linux/bin/intel64/icpc </SCXX>
<   <SFC> /opt/intel/oneapi/compiler/2021.4.0/linux/bin/intel64/ifort </SFC>
<   <SLIBS>
<     <append MPILIB="mpich"> -mkl=cluster </append>
<     <append MPILIB="mpich2"> -mkl=cluster </append>
<     <append MPILIB="mvapich"> -mkl=cluster </append>
<     <append MPILIB="mvapich2"> -mkl=cluster </append>
<     <append MPILIB="mpt"> -mkl=cluster </append>
<     <append MPILIB="openmpi"> -mkl=cluster </append>
<     <append MPILIB="impi"> -mkl=cluster </append>
<     <append MPILIB="mpi-serial"> -mkl </append>
<     <append>-L$(NETCDF_C_PATH)/lib -L$(NETCDF_FORTRAN_PATH)/lib -lnetcdff -lnetcdf -L$ENV{MKLROOT} -lmkl_rt </append>
<   </SLIBS>
<   <SUPPORTS_CXX>TRUE</SUPPORTS_CXX>
< </compiler>
<

PIO

Configuration of the Parallel I/O Library (PIO) used for the input/output of the model is done with the file cime/config/cesm/machines/config_pio.xml.

By now it is left as it is provided.

Batch

Configuration of the batch system is done with the file cime/config/cesm/machines/config_batch.xml

A new configuration has been added for hydra pbs queue system

$ cp cime/config/cesm/machines/config_batch.xml cime/config/cesm/machines/config_batch_orig.xml
$ diff cime/config/cesm/machines/config_batch.xml cime/config/cesm/machines/config_batch_orig.xml
698,728d697
<   <batch_system MACH="hydra" type="pbs" >
<     <batch_query args="-f" >qstat</batch_query>
<     <batch_submit>qsub </batch_submit>
<     <batch_cancel>qdel</batch_cancel>
<     <batch_env>-v</batch_env>
<     <batch_directive>#PBS</batch_directive>
<     <jobid_pattern>^(\S+)$</jobid_pattern>
<     <depend_string> -W depend=afterok:jobid</depend_string>
<     <depend_allow_string> -W depend=afterany:jobid</depend_allow_string>
<     <depend_separator>:</depend_separator>
<     <walltime_format>%H:%M:%S</walltime_format>
<     <batch_mail_flag>-M</batch_mail_flag>
<     <batch_mail_type_flag>-m</batch_mail_type_flag>
<     <batch_mail_type>, bea, b, e, a</batch_mail_type>
<     <submit_args>
<       <arg flag="-q" name="$JOB_QUEUE"/>
<       <arg flag="-l walltime=" name="$JOB_WALLCLOCK_TIME"/>
<       <arg flag="-A" name="$PROJECT"/>
<     </submit_args>
<     <directives>
<       <directive>-N {{ job_id }}</directive>
<       <directive default="n"> -r {{ rerunnable }} </directive>
<       <!-- <directive> -j oe {{ job_id }} </directive> -->
<       <directive> -j oe </directive>
<       <directive> -V </directive>
<     </directives>
<     <queues>
<       <queue walltimemin="" walltimemax="168:00:00" nodemin="0" nodemax="5" default="true">larga</queue>
<     </queues>
<   </batch_system>
<

Work-flow

configuration of the work-flow is done via the file cime/config/cesm/machines/config_batch.xml

By now is it left as it is.

Case creation

Prior to the compilation, we need to make sure that all the optional additional components have already been compiled (see next section). After that we are going to use cime/scripts/create_newcase to compile and use the model. The model is compiled for each new experiment, since user might activate different components each time and compiling only the required components makes the simulation more efficient.

./create_newcase --case [CaseName] --res [Resolution] --compset [Compset] --mach hydra

Where:

[CaseName]: Convention for the name of the experiment is done following this CESM Naming conventions web-page
[Resolution]: Available resolutions to use from CESM grids (not working). (We can use either: python3 cime/scripts/query_config --grids --full)
[Compset]: Componets activated
hydra: HPC to use

$ source /opt/load-libs.sh 1
$ cd cime/scripts/
$ ./create_newcase --case /share/cesm/expriments/b.day1.0 --res f19_g17 --compset B1850 --mach hydra >& run_create_newcase.log

Errors found

One must be aware, that it seems that error messages are not quite informative (by now)

Python error

/usr/bin/env: ‘python’: No such file or directory

Fixed by imposing python3

$ cp create_newcase create_newcase_orig
$ diff create_newcase create_newcase_orig
1c1
< #!/usr/bin/env python3
---
> #!/usr/bin/env python

Checking for the correct execution in file run_create_newcase.log and an error message is detected:

xmllint not found,...

Which seems to be related to the absence of the package libxml2-utils

New error:

Compset specific settings: name is RUN_STARTDATE and value is 0001-01-01
ERROR: Command: '/usr/bin/xmllint --xinclude --noout --schema /home/lluis.fita/CESM/v2.2.2/intel/my_cesm_sandbox/cime/config/xml_schemas/co
nfig_machines.xsd /home/lluis.fita/CESM/v2.2.2/intel/my_cesm_sandbox/cime/config/cesm/machines/config_machines.xml' failed with error '/hom
e/lluis.fita/CESM/v2.2.2/intel/my_cesm_sandbox/cime/config/cesm/machines/config_machines.xml:2776: element machine: Schemas validity error 
: Element 'machine': Missing child element(s). Expected is one of ( mpirun, module_system ).
/home/lluis.fita/CESM/v2.2.2/intel/my_cesm_sandbox/cime/config/cesm/machines/config_machines.xml fails to validate' from dir '/home/lluis.f
ita/CESM/v2.2.2/intel/my_cesm_sandbox/cime/scripts'

machine configuration for hydra was lacking, that it does not have modules, so it was included:

(...)
    </mpirun>
    <module_system type="none"/>
(...)

Queue-system related error:

Batch_system_type is pbs
job is case.run USER_REQUESTED_WALLTIME None USER_REQUESTED_QUEUE None WALLTIME_FORMAT %H:%M:%S
WARNING: No queue on this system met the requirements for this job. Falling back to defaults
ERROR: No queues found

No queue system was created for hydra. Now it has been added into cime/config/cesm/machines/config_batch.xml

Case setup

Now we are ready to set-up the case.

Going to the folder with the case ($ROOTCASE folder as it is understood)

$ cd /share/cesm/expriments/b.day1.0
$ ./case.setup >& run_case-setup.log

Looking for errors:

$ tail run_case-setup.log
You can now run './preview_run' to get more info on how your case will be run

errors

First error related to python...

$ ./case.setup 
/usr/bin/env: ‘python’: No such file or directory

Modifying it to use python3

$ cp case.setup case.setup_orig
$ diff case.setup case.setup_orig
1c1
< #!/usr/bin/env python3
---
> #!/usr/bin/env python

It happens everywhere, so, either I ask my IT team (as root) to fix it by creating a symlink to python, but based in python3 (see here)

# ln -s /usr/bin/python3 /usr/bin/python

Or I go back to the cime/scripts folder and change it everywhere: create_clone, create_newcase, create_test, query_config, query_testlists

Modify all the python scripts within cime/scripts/Tools

$ cp -R Tools Tools_orig

Scripts being modified: Tools/archive_metadata, Tools/bld_diff, Tools/bless_test_results, Tools/case.build, Tools/case.cmpgen_namelists, Tools/case_diff, Tools/case.qstatus, Tools/case.setup, Tools/case.submit, Tools/check_case, Tools/check_input_data, Tools/check_lockedfiles, Tools/cime_bisect, Tools/code_checker, Tools/compare_namelists, Tools/compare_test_results, Tools/component_compare_baseline, Tools/component_compare_copy, Tools/component_compare_test, Tools/component_generate_baseline, Tools/cs.status, Tools/e3sm_check_env, Tools/generate_cylc_workflow.py, Tools/get_case_env, Tools/get_standard_makefile_args, Tools/getTiming, Tools/jenkins_generic_job, Tools/list_e3sm_tests, Tools/list_e3sm_tests, Tools/mvsource, Tools/normalize_cases, Tools/pelayout, Tools/preview_namelists, Tools/preview_run, Tools/save_provenance, Tools/simple_compare, Tools/testreporter.py, Tools/wait_for_tests, Tools/xmlchange, Tools/xmlquery

Also inside folder Tools/xmlconvertors: Tools/xmlconvertors/config_pes_converter.py, Tools/xmlconvertors/grid_xml_converter.py, Tools/xmlconvertors/convert-grid-v1-to-v2

Case Build

Compiling the code for the case

$ ./case.build >& run_case-build.log

Looking for errors:

Errors

There are errors related to the use of python

(...)
ERROR: Command /home/lluis.fita/CESM/v2.2.2/intel/my_cesm_sandbox/components/pop/bld/build-namelist failed rc=2
out=ERROR in MARBL_diags_to_tavg.py
err=/usr/bin/env: ‘python’: No such file or directory
ERROR: env CASEROOT=/share/cesm/expriments/b.day1.0 CASEBUILD=/share/cesm/expriments/b.day1.0/Buildconf OCN_GRID=gx1v7OCN_TAVG_TRAC
ER_BUDGET=FALSE POPROOT=/home/lluis.fita/CESM/v2.2.2/intel/my_cesm_sandbox/components/pop /home/lluis.fita/CESM/v2.2.2/intel/my_ces
m_sandbox/components/pop/input_templates/ocn.ecosys.tavg.csh 4 .false. .true. failed: 256

Editting various python scripts to make sure of the use of python3: components/pop/MARBL_scripts/add_cocco_to_init.py, components/pop/MARBL_scripts/MARBL_diags_to_tavg.py, cime/src/components/stub_comps_mct/siac/cime_config/buildlib, cime/src/components/stub_comps_mct/siac/cime_config/buildlib_cmake, cime/src/components/stub_comps_mct/siac/cime_config/buildnml

Case send

Optional additional components

ESM

It is necessary the High Performance Modeling Infrastructure (ESM) in May 2024, the latest version was the 8.6.0 and is the one being installed.

Getting the code in hydra in folder ESM

$ wget https://github.com/esmf-org/esmf/archive/refs/tags/v8.6.0.tar.gz

Compilation is done following these documentation, which the right detailed procedure specific-compilation-instructions.

GNU compilation

Installation location

$ mkdir -p v860/gnu
$ cd v860/gnu
$ tar xvfz ../v8.6.0.tar.gz
$ cd esmf-8.6.0/
$ ls
build  build_config  cmake  LICENSE  makefile  README.md  scripts  src

Starting by defining the location of the code

$ export ESMF_DIR=$PWD

Running to get local information

$ make info >& run_make_info.log

Launching the makefile in parallel:

$ make -j8 lib >& run_make.log
$ tail run_make.log
(...)
ESMF library built successfully on Mon 13 May 2024 12:58:46 PM -03
To verify, build and run the unit and system tests with: make check
 or the more extensive: make all_tests

Verifying that installation worked fine

$ make all_tests >& run_make_tests.log
$ $ cat run_make_tests.log  | grep failed
The following unit test files failed to build, failed to execute or crashed during execution:
Found 7800 non-exhaustive single processor unit tests, 7744 passed and 56 failed.
Found 8 single processor system tests, 8 passed and 0 failed.
Found 44 single processor examples, 44 passed and 0 failed.
Found 8 single processor system tests, 8 passed and 0 failed.
Found 44 single processor examples, 44 passed and 0 failed.
Found 7800 non-exhaustive single processor unit tests, 7744 passed and 56 failed.

Installing

$ make install >& run_make_install.log
$ tail run_make_install.log
(...)
ESMF installation complete.